Search results for "vanadium catalyst"
showing 10 items of 13 documents
Copolymerization of ethylene with norbornene or 1-octene using supported ionic liquid systems
2016
Copolymerization of ethylene with norbornene (E/NB) and ethylene with 1-octene (E/Oct) is performed using supported ionic liquid (SIL) systems, in which metallocene (Cp2VCl2) or post-metallocene [VCl2(salenCl2)] vanadium catalysts are immobilized in pyridinium chloroaluminate ionic liquid supported on silica. The studied SIL catalysts show higher activities as well as stability than their non-supported analogues. In addition, higher activities and better comonomer incorporation are observed for norbornene (above 30 mol%). The comonomer incorporation has considerable influence on copolymer molecular weight (M w), melting temperature, crystallinity degree, and microstructure of the copolymers…
The effect of the comonomer on the copolymerization of ethylene with long chain α-olefins using Ziegler–Natta catalysts supported on MgCl2(THF)2
2000
Abstract The effect of the type of the comonomer (1-pentene, 1-hexene, 1-octene, 1-decene and 1-dodecene) on the copolymerization of ethylene with α-olefin over vanadium (VOCl3 and VCl4) and titanium (TiCl4) catalysts supported on MgCl2(THF)2 and activated by Et2AlCl was studied. The results show that the introduction of a longer α-olefin in the ethylene polymerization feed depresses the catalytic activity of all investigated catalysts. The catalyst activity does not depend on the type of the comonomer applied but changes with the comonomer concentration in the feed. The incorporation of α-olefin in the polymer chain was found to be dependent on the type and concentration of the comonomer i…
Dichlorovanadium(IV) diamine-bis(phenolate) complexes for ethylene (co)polymerization and 1-olefin isospecific polymerization
2018
Abstract Two vanadium complexes bearing amine-bis(phenolate) ligands with the amino side-arm donor, [V{Me2NCH2CH2N(CH2-2-O-3,5-tBu2-C6H2)2}Cl2] (1) and [V{Me2NCH2CH2N(CH2-2-O-3,5-tBu2-C6H2)(CH2-2-O-C6H4)}Cl2] (2), were synthesised and characterized by FTIR and 1H NMR spectroscopy. Upon activation with Al(iBu)3/Ph3CB(C6F5)4, these complexes became active catalysts for 1-octene polymerization giving highly stereoregular polymers (mmmm ∼ 90%) having regioirregularly arranged units. The catalytic activity of the catalysts in ethylene homo- and copolymerization, and their ability to incorporate a comonomer were highly dependent on both the activator type and the complex structure. 1/EtAlCl2 exhi…
Struktura i właściwości kopolimerów etylenu z norbornenem otrzymanych wobec katalizatora wanadocenowego
2018
Kopolimery etylenu z norbornenem ze względu na swoje wyjątkowe właściwości pozwalają na ich potencjalnie szerokie zastosowanie. Jednak w zależności od warunków prowadzenia syntezy, a przede wszystkim od zastosowanego katalizatora, właściwości takiego kopolimeru mogą się zmieniać w szerokim zakresie. W prezentowanej pracy zbadano właściwości wybranych kopolimerów etylenu (E) z norbornenem (NB) otrzymanych przy wykorzystaniu homogenicznego katalizatora wanadocenowego Cp2VCl2 aktywowanego tradycyjnym związkiem glinoorganicznym AlEt2Cl. Określono zależność pomiędzy stopniem wbudowania komonomeru w łańcuch kopolimeru a mikrostrukturą, masą molową, rozkładem mas molowych, temperaturą zeszklenia i…
Wpływ wybranych parametrów na efektywność katalizowanej wanadocenem kopolimeryzacji etylenu z norbornenem i właściwości otrzymanych produktów
2019
W pracy zbadano wpływ parametrów reakcji na kopolimeryzację etylenu z norbornenem wobec katalizatora wanadocenowego (Cp2VCl2) w obecności trichloroctanu etylu (ETA). Przeprowadzono serię reakcji kopolimeryzacji, zmieniając w każdej z nich jeden z parametrów reakcji: temperaturę lub ciśnienie etylenu. Następnie zbadano temperaturę zeszklenia, stopień wbudowania norbornenu i mikrostrukturę otrzymanych kopolimerów, poddając je analizie DSC oraz spektroskopii 13C NMR. Wykazano wpływ badanych parametrów na aktywność katalizatora oraz ilość i sposób wbudowania jednostek norbornenu w łańcuch polimerowy, jak również wartość temperatury zeszklenia produktu. Stwierdzono, że właściwości otrzymanego ko…
Vanadium catalysts for ethylene-norbornene copolymerization
2020
Kopolimery cyklicznych olefin (COCs) stanowią obiecującą grupę materiałów o specyficznych, możliwych do zaprojektowania właściwościach. Szczególnym zainteresowaniem w tej grupie związków cieszą się kopolimery etylenu z norbornenem. Do ich syntezy stosuje się różnorodne kompleksy metali przejściowych, przede wszystkim pierwiastków z grupy 4. Artykuł stanowi przegląd literatury dotyczącej wykorzystania katalizatorów wanadowych z różnego rodzaju ligandami w syntezie kopolimerów etylenu z norbornenem. Opisano wpływ ligandów i warunków prowadzenia reakcji na aktywność oraz wybrane właściwości otrzymanych kopolimerów.
Copolymerization of ethylene with higher 1-olefins over vanadium catalyst supported on Al(i-Bu)3 modified magnesium carrier
2008
Badano proces kopolimeryzacji etylenu z wyższymi 1-olefinami (C6-C12) wobec katalizatora wanadowego (VOCl3) immobilizowanego na nośniku magnezowym MgCl2 (THF) 2 modyfikowanym z zastosowaniem Al(i-Bu) 3. W charakterze aktywatora nośnikowego prekatalizatora wanadowego zastosowano Et2AlCl. Stwierdzono, że aktywność takiego układu katalitycznego jest porównywalna z aktywnością katalizatora z prekursorem wanadowym osadzonym na niemodyfikowanym nośniku magnezowym. Zaobserwowano także, że wprowadzenie komonomeru do środowiska reakcji powoduje niewielkie zmniejszenie wydajności procesu w porównaniu z homopolimeryzacją etylenu, postępującą w miarę wzrostu stężenia komonomeru w środowisku reakcji. Do…
Naturally Occurring Oxazole Structural Units as Ligands of Vanadium Catalysts for Ethylene-Norbornene (Co)polymerization
2021
1,3-Oxazole and 4,5-dihydro-1,3-oxazole are common structural motifs in naturally occurring peptides. A series of vanadium complexes were synthesized using VCl3(THF)3 and methyl substituted (4,5-dihydro-1,3-oxazol-2-yl)-1,3-oxazoles as ligands and analyzed using NMR and MS methods. The complexes were found to be active catalysts both in ethylene polymerization and ethylene-norbornene copolymerization. The position of methyl substituent in the ligand has considerable impact on the performance of (co)polymerization reaction, as well as on the microstructure, and thus physical properties of the obtained copolymers.
Titanium and Vanadium Catalysts with 2-Hydroxyphenyloxazoline and Oxazine Ligands for Ethylene-Norbornene (co)Polymerization
2019
A series of titanium and vanadium complexes with oxazoline 2-(4,5-dihydro-1,3-oxazol-2-yl)phenol (L1), 2-(4-methyl-4,5-dihydro-1,3-oxazol-2-yl)phenol (L2), and oxazine 2-(5,6-dihydro-4H-1,3-oxazin-2-yl)phenol (L3) ligands were synthesized, and their structures were determined by NMR and MS methods as (L)2MtCl2. The vanadium complexes were found to be highly active in ethylene (7300 kgPE/(molV·
Ethylene polymerization using vanadium catalyst supported on silica modified by pyridinium ionic liquid
2016
Vanadium catalyst systems (SIL1–3A(B)/V) for ethylene polymerization were obtained by immobilization of the Cp2VCl2precursor (V) in the ionic liquid -[3-(triethoxysilyl)propyl]pyridinium chloride (IL), modified by AlCl3 and AlEtCl2(A) or AlEt2Cl (B), and supported on three types of silica carrier S1–3. The properties of the ionic liquid supports were determined using Fourier transform infrared spectroscopy, Brunauer–Emmett–Teller measurements, scanning electron microscopy and elemental analysis. The best results (above 2 tons PE (mol V)−1(0.5 h)−1) were obtained using the catalyst system SIL3B/V. Addition of ethyl trichloroacetate is possible in the ionic liquid medium and it further increas…